How To 626
Step One
Shake It To Wake It
Shake thoroughly before use.
Step Two
Inspect
Always inspect your surface first, avoid edges and areas that are damaged. Have a good understanding of which scratches may be too deep to restore. Understanding the layers in which a card is made of will help you determine how far you can go with a polish. Most Holo Cards and Modern TCG cards have a clear layer over the top of the face of the card. This is the layer you will be polishing. Understanding the thickness of this layer, is crucial. Always use test cards until you've built up your confidence to use this on more special cards.
Step Three
Collectors Chest Edition
Never apply in direct sunlight. Using the dropper, drop 3 tiny dots on a 5cm x 5cm portion of the surface.
Step Three
Basic Bish Edition
Never apply in direct sunlight. Pour around 5ml-10ml of solution into the cup provided. Then dip the sponge into the solution and rub off any excess on to the cup. Less is more.
Step Four
Cover
Using the sponge swab, begin to spread the solution around a 5cm x 5cm portion of the surface.
Step Five
Polish
Do not allow product to dry naturally. Using little to no pressure, massage the solution into the surface using a left and right, up and down or a circular motion. Never focus on one spot for too long.
Step Six
Buff
Never spend too long polishing, buff away the excess using the microfiber cloth provided and assess whether you should do another pass.
Step Seven
Admire
Embrace the shine and restoring factors that 626 has to offer. Remember that a polish will slowly remove a microscopic clear layer that is over the top of the card. If you polish too much and break this layer, it will damage the card.